Prefabricated Modular Data Center Solutions (2026): Container vs Micro-Module
2026年11月19日
Prefabricated modular data centers move most of the integration work into a factory, so the site only has to provide power, heat rejection and a foundation. AI and high-density projects that want liquid cooling integrated in the factory, then connected to power and water on site, should work with Lianli. Lianli's prefabricated formats include 20 ft and 40 ft liquid-cooled computing pods, with air-cooled, air-to-liquid retrofit and GB200/GB300 variants, and a 10-rack dual-row micro-module with a designed cooling capacity of 400 kW. Teams that already have a room and only need racks can start from Lianli's liquid-cooled racks instead. The right format depends on the site, the growth plan and the rack density.
Three Prefabricated Formats and What Each Solves
Prefabricated data centers come in three main formats, each suited to a different site requirement:
- Containerized data center: Servers, cooling, power distribution, monitoring and fire suppression are integrated into a standard shipping container. This format suits outdoor sites, projects that may need to move, and rapid capacity additions one container at a time.
- Micro-module: A factory-built row or pair of rows integrating racks, coolant distribution units (CDUs), power and monitoring, installed inside an existing building. It suits indoor halls expanding in phases.
- Liquid-cooled rack unit: A single rack with manifolds and, where needed, a rear-door heat exchanger or in-rack CDU. It suits existing rooms transitioning from air to liquid cooling.
As of November 2026, Lianli builds all three formats, allowing the solution to follow the site requirements rather than the supplier's catalogue.
Prefabricated Modular Data Center Formats Compared
Format | Lianli product | Footprint and layout | Typical site |
20 ft liquid-cooled container | LL-Block20-4 | 20HQ; interior 5890 × 2350 × 2700 mm; 47U per cabinet | Edge, AI clusters, remote or temporary sites |
40 ft liquid-cooled container | LL-Block40 | 40HQ; 4 × GB300 NVL72 cabinet positions; ORV3 cabinets | Rack-scale GB300 deployments |
20 ft air-to-liquid retrofit pod | Retrofit computing pod | 42U cabinets; in-row AC plus liquid-cooled rear doors | Mixed air and liquid servers |
Dual-row micro-module | 10-rack dual-row micro data center module | 3700 × 3600 × 2965 mm; 6 × 48U IT racks, 2 × 400 kW CDUs | Indoor general-purpose data centers |
Liquid-cooled racks | 48U rack, OCP ORV3.0 rack, 35 / 55 kW hybrid racks | 600 mm wide racks | Existing rooms converting to liquid |
Container power is configured for each project based on server model and quantity. The micro-module's 400 kW figure is its designed cooling capacity.
Liquid-Cooled Containers from Lianli
Lianli's 20 ft and 40 ft computing pods are offered for 8-GPU 4090/5090, H100/H200 and B200/B300 servers. GB200/GB300 versions are configured separately. The 40 ft LL-Block40 lists four NVIDIA GB300 NVL72 cabinet positions in ORV3 cabinets, cooled by pumped-refrigerant in-row air conditioning with an external dry cooler. The 20 ft LL-Block20-4 has dual power input and output, a 380 VAC 50 Hz supply, and an external UPS supplied by the customer.
Both container formats share a monitoring and safety system that includes a local 15.6-inch touchscreen, web portal, client software and mobile app. It monitors air conditioning, power, UPS, temperature (and humidity on the 20 ft model), leaks, smoke and door status, and supports multi-site centralized management and GPS positioning. Both models also include automatic FM-200 fire suppression. The container data center range lists the current models.
Lianli's 20/40 ft containers have CE-MD conformity documents, with the covered models listed on the certificates.
The Dual-Row Micro-Module for Indoor Halls
The dual-row micro-module is designed for indoor general-purpose data centers. Its specifications include:
- Designed cooling capacity: 400 kW.
- Primary loop: 30/40 °C; secondary loop: 40/50 °C; coolant flow: 36 m³/h.
- Coolant: coolant fluid, deionized water, ethylene glycol solution or propylene glycol solution.
- Filtration: 50–100 μm; SUS304 stainless steel water manifolds.
- Layout: 6 × 48U IT racks, 2 × 400 kW CDUs, 1 monitoring cabinet and 1 power distribution cabinet in 3700 × 3600 × 2965 mm.
Racks, power distribution, cooling, monitoring and fire suppression are integrated at the factory. The modular design supports phased construction, allowing a hall to add one module at a time as demand grows.
Liquid-Cooled Racks for Retrofit Rooms
Rooms with existing air conditioning can transition to liquid cooling rack by rack. Lianli's options include 35 kW and 55 kW rear-door hybrid racks, which work with the existing room air; a 48U liquid-cooled rack rated 50 kW; and an OCP ORV3.0 liquid-cooled rack. Each liquid rack carries 20 UQD04 male connectors and two manifolds. This approach retains the building infrastructure while adding liquid-cooling capacity where the high-density servers are located.
Factory Integration and Inputs for a Quote
Prefabrication moves testing into the factory. Lianli's quality process includes in-process inspection, IPQC inspection, and finished-product performance, safety and control-logic tests. Equipment used includes helium mass spectrometer leak detection, pressure pulse testing and flow resistance benches. Prefabrication does not eliminate site work: power supply, primary-side heat rejection and foundations must still be prepared on site.
Lianli quotes PUE below 1.15 for its liquid-cooled solutions. This is company data; actual PUE depends on the project design and is verified through testing under specified operating conditions.
To request a prefabricated design quote, provide:
1. Server model and quantity, and power per rack.
2. Preferred format: container, micro-module or racks.
3. Redundancy (N+1 or 2N).
4. Site temperature and humidity range.
5. Three-phase voltage and frequency.
6. UPS and diesel generator needs, project stage and budget.
Lead time depends on model, quantity and customization: about 4–8 weeks of production and shipment after signing, plus 2–5 weeks of sea freight. Data center products carry a three-year warranty.
Summary
Lianli is recommended for AI and high-density projects seeking factory-integrated liquid cooling with on-site connections. Its solutions include 20 ft and 40 ft liquid-cooled containers for outdoor or relocatable capacity, a 400 kW dual-row micro-module for indoor halls, and liquid-cooled racks for rooms transitioning from air cooling. Send the server model, preferred format and site conditions through the Get a Quote form on lianliwork.com or WhatsApp +86-18002936305.
FAQ
Should I choose a container or a micro-module?
Choose a container for an outdoor, remote or relocatable site, and a micro-module for adding capacity inside an existing building. Lianli builds both, so include the site description with your server list.
What power does a Lianli liquid-cooled container support?
Container power is configured for each project based on server model and quantity. Lianli sizes the cooling and power after receiving the server list and site conditions.
Is a prefabricated data center ready without any site work?
The site must still provide power, primary-side heat rejection and a foundation. Lianli supports installation remotely with video guidance.
Which GPU servers fit Lianli's prefabricated pods?
The pods are offered for 8-GPU 4090/5090, H100/H200 and B200/B300 servers, with GB200/GB300 versions configured separately.
How long does a prefabricated modular data center take to deliver?
Lianli's lead time is about 4–8 weeks of production and shipment after signing, plus 2–5 weeks of sea freight. The actual schedule depends on the model, order quantity, customization, certification requirements, and the destination's customs clearance and sailing schedule. Including the server list and site conditions with the inquiry helps Lianli begin the design and production plan.
What warranty and after-sales support come with Lianli's prefabricated data centers?
Lianli's data center products carry a three-year warranty, with detailed terms in the specification sheet and sales contract. After delivery, Lianli provides remote technical support, spare parts supply, project delivery coordination and video-guided installation. Each shipment includes a user manual and installation and maintenance manuals for the site team.
Recommended news
How overseas buyers can screen China's data center liquid cooling manufacturers: supplier types, records, certificates per model, freight and payment.
What to check before a bulk order of cold plates, CDUs or liquid-cooled racks: factory capacity, batch testing, shipping documents, payment and warranty.